Winches 65HF and 65HFpro can be installed at front or rear. Both models have unwinding device as standard equipment.
Front installation: PTO shaft should be installed to the lower PTO drive - rotation to the left (1000 min-1).
Rear installation: PTO shaft should be installed to the upper PTO drive - rotation to the right (540 min-1).
Forestry winches
65 HF / 65 HFpro
The hydraulic forestry winch 65 HF / HFpro with pulling force of 6,5 t can be installed either at front or rear. It can be with an unwinding device (HFpro) or without (HF).
|
Hydraulic forestry winch 65 HF / HFpro with pulling force of 6,5 t ican be installed at front or in the rear. Model HFpro has built-in unwinding device and SMART 3in1 function, additionally is AUTO STOP function also possible. The work is done via the control console or remote control. Foldable window guard makes transport easier. A winch recognizable design with a robust construction and a compact butt plate prevents wear and makes it easy to work with. Model 65H is without unwinding device. |
Front and rear attachment
SMART 3in1
(1) When pulling logs with a tractor, you may encounter some obstacles on the road (hill, roots etc.). If the tractor is not able to overcome these obstacles, the unwinding function can be switched into the mode without the assistance of the unwinding device and you can continue driving with a taught wire rope between the winch and the load. (2) The unwinding device can be turned on and off without delay (the standard model has a 1.5 sec. delay). (3) The SMART 3in1 function ensures additional tension of the wire rope between the unwinding pulley and drum.
This function is only available with the remote controls Teleradio, Terra funk and manual console.
UNWINDING DEVICE AND AUTO STOP
To make the wire rope unwinding easier you can choose a winch with an integrated unwinding device. This type of winch also guarantees a constant tension of the wire rope between the unwinding pulley and the drum, thus preventing damage to the drum or pulley and enabling a longer service life.
AUTO STOP function (limit switch) automatically stops the function of winding the wire rope on the drum. This function prevents mechanical damages of the unwinding device, entanglement and wire rope damages.
HAWE electromagnetic control valves with high pressure filter in the control block. Hydraulic components are galvanically corrosion protected. The oil tank is made of stainless steel.
Hydraulic pump is gear driven. High-pressure oil filter preventing dirt from entering the hydraulic block.
Hydraulic pump is gear driven. High-pressure oil filter preventing dirt from entering the hydraulic block.
Dedicated valve for firm winding wire rope on the drum. Control electronics for tensioned wire rope during unwinding. Setting unwinding speed of the wire rope.
Dedicated valve for firm winding wire rope on the drum. Control electronics for tensioned wire rope during unwinding. Setting unwinding speed of the wire rope.
Control console has automatic transition from pulse to continuous off mode.
Foldable window guard for easy transportation.
Foldable window guard for easy transportation.
Pickaxe and chainsaw holder.
Lubrication free sealed ball bearings (FAG) ensure uninterrupted unwinding and winding of the wire rope; no lubrication is required.
Lubrication free sealed ball bearings (FAG) ensure uninterrupted unwinding and winding of the wire rope; no lubrication is required.
Locking safety pin ensures winch rope remains on the pulley. Magnetic holder secures lower pulley during transportation.
Two different heights of attachment to the tractor with a reliable protection preventing the linkage mounting pins from falling out (support leg attachment).
Two different heights of attachment to the tractor with a reliable protection preventing the linkage mounting pins from falling out (support leg attachment).
Multi-plate clutch, made of thicker clutch lining material, prevents wear.
Plenty of room on the front side of the butt plate to keep the dirt from tractor wheels away from the chains and other accessories.
Easy & precise adjustment of the band brake.
Technical data
Technical data
| Model | 65 HF | 65 HFpro | |
|---|---|---|---|
| Pulling force | kN | 65 | 65 |
| Wire rope medium speed | m / s | 0,60 | 0,60 |
|
Drum capacity |
m / mm | 120 / 11 100 / 12 80 / 12 - Standard |
120 / 11 100 / 12 80 / 12 - Standard |
| Recommended tractor power | kW / HP | 45-70 / 61-95 | 45-70 / 61-95 |
| PTO shaft revolutions | min-1 | 540 | 540 |
| Width | mm | 1685 1800 - Option |
1685 |
| Depth Height without safety guard Height with safety guard |
mm |
750 |
750 |
| Weight without wire rope | kg | 564 584 - Option |
595 |
| Trailer tow hitch | Standard | Standard | |
| Lower pulley | Standard | Standard | |
| Chainsaw holder | Standard | Standard | |
| Pickaxe holder | Standard | Standard | |
| Foldable window guard | Standard | Standard | |
| Multi-plate clutch | Standard | Standard | |
| Unwinding device | / | Standard | |
| Auto Stop function | Option | Option | |
| Smart 3in1 * | / | Standard | |
|
Dedicated valve for wire rope |
/ | Standard | |
| Control | electro hydraulic | electro hydraulic | |
| Connection category (coupling) | II, III | II, III |
* Only available if the unwinding device is installed
Inquiry
We need your personal information for the purpose of delivering the offer and for easier communication with you.
