Forestry winch 1x75 HK / HKpro

(1) When pulling logs with a tractor, you may encounter some obstacles on the road (hill, roots etc.). If the tractor is not able to overcome these obstacles, the unwinding function can be switched into the mode without the assistance of the unwinding device and you can continue driving with a tight wire rope between the winch and the load. (2) The unwinding device can be turned on and off without delay (the standard model has a 1.5-sec. delay). (3) The Smart 3in1 function ensures additional tension of the wire rope between the unwinding pulley and drum.

This function is only available with the remote controls Teleradio, Terra funk and manual console.

The drive consists of a worm gear enabling high gear ratios, and spur gears elements immersed in the oil bath which enables higher efficiency, reduces maintenance costs and increases its life span. The torque from tractor is transited to the worm gear on the winch over a triple-strand roller chain.

The multi-plate clutch prevents overheating/slipping of the clutch (6 plates).

An extra-large drum capacity ensures that a longer rope can be wound to cover a larger area.

1. Chain drive for tractor
2. Hydraulic motor drive for excavator (usually MVM 315 or 400)

Automatic proportional regulation of pulling force.

More powerful pump powers the hydraulic system and drives the unwinding device.

No more opening of the cover for insight. Easily check system (by using the connector for external inspection) and working pressure (gauge).

Measuring the distance to the wire rope using an optical sensor to determine amount of winded wire rope.